12-24 VDC - Synchronized 4 Channel Hall Effect Actuator Control - 25A - Wireless Remotes
12-24 VDC - Synchronized 4 Channel Hall Effect Actuator Control - 25A - Wireless Remotes
Model: PA-41-4-12V24V
Couldn't load pickup availability
The PA-41-4-12V24 control box allows for synchronous control of four linear actuators with hall effect feedback. Using either of the 2 wireless remotes provided, users have the ability to extend, stop, and retract their synchronized actuators from up to 100 feet away (open air). The control box has both momentary and non-momentary capabilities for the wireless remotes, a wired RC-13 momentary rocker switch, as well as an in-line fuse to protect against short circuits.
Using the included wire harness, connect the linear actuators to the control box. Apply 12-24 VDC across the power wires and the system is now ready to use. It is important to ensure that the power supply has a sufficient amperage rating to control the linear actuators. The PA-41-4-12V24 is designed to handle a maximum of 6.25 A per channel at 12 VDC and 5 A per channel at 24 VDC.
Please see the PA-41-4-12V24 Data Sheet for information about controls, wiring, and troubleshooting.
* Only compatible with 12 VDC or 24 VDC hall effect type actuators. Controls 4 matching Hall Effect actuators simultaneously to travel the same speed together in the same direction. Ensure PA-04-HS actuators are not fully loaded to stay within the current rating.
The PA-41-4-12V24 control box allows for synchronous control of four linear actuators with hall effect feedback. Using either of the 2 wireless remotes provided, users have the ability to extend, stop, and retract their synchronized actuators from up to 100 feet away (open air). The control box has both momentary and non-momentary capabilities for the wireless remotes, a wired RC-13 momentary rocker switch, as well as an in-line fuse to protect against short circuits.
Using the included wire harness, connect the linear actuators to the control box. Apply 12-24 VDC across the power wires and the system is now ready to use. It is important to ensure that the power supply has a sufficient amperage rating to control the linear actuators. The PA-41-4-12V24 is designed to handle a maximum of 6.25 A per channel at 12 VDC and 5 A per channel at 24 VDC.
Please see the PA-41-4-12V24 Data Sheet for information about controls, wiring, and troubleshooting.
* Only compatible with 12 VDC or 24 VDC hall effect type actuators. Controls 4 matching Hall Effect actuators simultaneously to travel the same speed together in the same direction. Ensure PA-04-HS actuators are not fully loaded to stay within the current rating.
| Number of Channels | 4 |
| Input Voltage | 12-24 VDC |
| Output Voltage | 12-24 VDC |
| Max Current at 12VDC Per Channel | 6.25 A |
| Max Current at 24VDC Per Channel | 5 A |
| Duty Cycle | 10% (2 min on, 18 min off) |
| Feedback Input | Hall Effect Sensor |
| Operational Temperature | -30°C to 60°C (-22°F to 149°F) |
| Housing Color | Black |
| Housing Material | Plastic |
| Certifications | CE, FCC |
| Kit Includes | 1 control box, 2 wireless remotes, 1 power wire harness w/ in-line 30A fuse, 1 Remote Sync Pushbutton, Wired Rocker Switch (RC-13) |
| Wireless Frequency | 433.92 Mhz |
| Wireless Range | 100 Ft |
| Wireless Remote Functions | Up, Down, Pause (Momentary/Non Momentary Modes) |
| Wired Rocker | Included |
| Remote Battery Type | 2x CR2016 3V Lithium cell |
| Dimensions | 7.87" x 3.35" x 1.10" |
| Warranty | 18 Months |
Following a set of standards is crucial for businesses to ensure their products and services can meet a level of quality that promotes customer satisfaction. At Progressive Automations, we aim for nothing but the best for our customers and strive toward continual improvements. Because of this, we are excited to announce that Progressive Automations is now ISO 9001:2015 certified!
Read MoreData Sheets
PA-41-4-12V24V Data Sheet
Depending on your application, there are different specification requirements you should consider when determining the linear actuator you need. These requirements include force, stroke, speed and mounting dimensions. For detailed actuator information, you can refer to either the datasheet or the specification table located on the selected actuator's product page. You can also contact us to speak with one of our expert engineers.
Duty cycle is the fraction of the working period in which a linear actuator can remain active. You can calculate the duty cycle of a linear actuator by using the following equation: Duty cycle (%) = (Time the linear actuator is active) / (Time for one working period)
For example: With a 25% duty cycle, an actuator can run for 5 minutes continuously before needing to rest for 15 minutes before operating.
Stroke is the travel distance of the extending rod. To find the stroke length you require, measure your application from the fully retracted position to the fully extended position. The difference will equal the stroke length you require.
We always recommend purchasing an actuator with a higher force rating than what the application requires. If unsure of your force requirements, this article may help you calculate this: How to Calculate Force to Find the Right Linear Actuator
Yes, this is possible. However, it does depend on the units you are currently using. To synchronize actuators, they require a form of feedback such as a potentiometer or hall effect sensors. For more information, see below some of our key content regarding linear actuator synchronization.
The control box you choose should be able to provide sufficient voltage and current rating to your actuator. If you are unsure of the specifications, please contact us.
Alternatively, you can also find compatible control boxes on your selected linear actuator's product page.
Backdriving is when an actuator starts sliding down under load, when it is either overloaded or when the actuator has been damaged. Watch the video.
What Does Dynamic and Static Load Ratings Mean?Dynamic load rating is the amount of weight an actuator can pull or push safely when being powered. Static load rating is the amount of weight the actuator can hold or withstand without back driving when it is not being powered. For example, let's just say you have an actuator installed on a window and the static load rating of the actuator is 100lbs, it could experience backdriving when there is a high wind event, which means there will be more pressure exerted on the actuator which would exceed the 100lbs load rating of the actuator.
What Is Lateral Loading?Lateral loading is when the actuator experiences forces from the lateral plane. Actuators are not meant to handle lateral forces at all so if it experiences any lateral forces, it will likely damage the actuator or bend the rod. So it's advised never to use lateral forces and always make sure the actuator is fully in line or in sync with your application, so it does not take any load other than the axial load. Watch the video.